Part Number: 211-405-371/A
Standard size ball joint for the front torsion arm on bay window vans.
The outer diameter of this ball joint at the knurl section is 48.3mm. There should be a minimum overlap/interference of 0.2mm between the joint and the torsion arm bore. It is important that the torsion arm bore is measured accurately before installing ball joints to ensure the interference fit is correct. The bore should be 48.1mm diameter maximum.
Suitable For
- Type 2 (T2 - Bay Window) 1968 to 1979
| Vehicle Types | |
|---|---|
| Vehicle Types | Type 2 (T2 - Bay Window) |
| Manufacturer | |
| Marca | Meyle |
